Mi Home Start


The easiest way to install the package is to use pip: pip3 install python-miio . Using virtualenv is recommended.

Please make sure you have libffi and openssl headers installed, you can do this on Debian-based systems (like Rasperry Pi) with

apt-get install libffi-dev libssl-dev

Device discovery

Devices already connected on the same network where the command-line tool is run are automatically detected when mirobo discover is invoked.

To be able to communicate with devices their IP address and a device-specific encryption token must be known. If the returned a token is with characters other than 0s or fs, it is likely a valid token which can be used directly for communication. If not, the token needs to be extracted from the Mi Home Application, see Tokens from Mi Home logs for information how to do this.


For some devices (e.g. the vacuum cleaner) the automatic discovery works only before the device has been connected over the app to your local wifi. This does not work starting from firmware version 3.3.9_003077 onwards, in which case the procedure shown in Tokens from backups has to be used to obtain the token.


Some devices also do not announce themselves via mDNS (e.g. Philips’ bulbs, and the vacuum when not connected to the Internet), but are nevertheless discoverable by using a miIO discovery. See Discovery by a handshake for more information about the topic.


Discovery by a handshake

The devices supporting miIO protocol answer to a broadcasted handshake packet, which also sometime contain the required token.

Executing mirobo discover with --handshake 1 option will send a broadcast handshake. Devices supporting the protocol will response with a message potentially containing a valid token.

$ mirobo discover --handshake 1
INFO:miio.device:  IP Xiaomi Mi Robot Vacuum - token: b'ffffffffffffffffffffffffffffffff'


This method can also be useful for devices not yet connected to any network. In those cases the device trying to do the discovery has to connect to the network advertised by the corresponding device (e.g. rockrobo-XXXX for vacuum)

Tokens full of 0s or fs (as above) are either already paired with the mobile app or will not yield a token through this method. In those cases the procedure shown in Tokens from Mi Home logs has to be used.


Tokens from Mi Home logs

The easiest way to obtain tokens is to browse through log files of the Mi Home app version 5.4.49 for Android. It seems that version was released with debug messages turned on by mistake. An APK file with the old version can be easily found using one of the popular web search engines. After downgrading use a file browser to navigate to directory SmartHome/logs/plug_DeviceManager, then open the most recent file and search for the token. When finished, use Google Play to get the most recent version back.


Tokens from backups

Extracting tokens from a Mi Home backup is the preferred way to obtain tokens if they cannot be looked up in the Mi Home app version 5.4.49 log files (e.g. no Android device around). For this to work the devices have to be added to the app beforehand before the database (or backup) is extracted.

Creating a backup

The first step to do this is to extract a backup or database from the Mi Home app. The procedure is briefly described below, but you may find the following links also useful:


Start by installing the newest version of the Mi Home app from Google Play and setting up your account. When the app asks you which server you want to use, it’s important to pick one that is also available in older versions of Mi Home (we’ll see why a bit later). U.S or china servers are OK, but the european server is not supported by the old app. Then, set up your Xiaomi device with the Mi Home app.

After the setup is completed, and the device has been connected to the Wi-Fi network of your choice, it is necessary to downgrade the Mi Home app to some version equal or below 5.0.19. As explained here and in github issue #185, newer versions of the app do not download the token into the local database, which means that we can’t retrieve the token from the backup. You can find older versions of the Mi Home app in apkmirror.

Download, install and start up the older version of the Mi Home app. When the app asks which server should be used, pick the same one you used with the newer version of the app. Then, log into your account.

After this point, you are ready to perform the backup and extract the token. Please note that it’s possible that your device does not show under the old app. As long as you picked the same server, it should be OK, and the token should have been downloaded and stored into the database.

To do a backup of an Android app you need to have the developer mode active, and your device has to be accessible with adb.


Add a link how to check and enable the developer mode. This part of documentation needs your help! Please consider submitting a pull request to update this.

After you have connected your device to your computer, and installed the Android developer tools, you can use adb tool to create a backup.

adb backup -noapk com.xiaomi.smarthome -f backup.ab


Depending on your Android version you may need to insert a password and/or accept the backup, so check your phone at this point!

If everything went fine and you got a backup.ab file, please continue to Extracting tokens.


Create a new unencrypted iOS backup to your computer. To do that you’ve to follow these steps:

  • Connect your iOS device to the computer
  • Open iTunes
  • Click on your iOS device (sidebar left or icon on top navigation bar)
  • In the Summary view check the following settings
    • Automatically Back Up: This Computer
    • Disable Encrypt iPhone backup
  • Click Back Up Now

When the backup is finished, download iBackup Viewer and follow these steps:

  • Open iBackup Viewer
  • Click on your newly created backup
  • Click on the Raw Files icon (looks like a file tree)
  • On the left column, search for AppDomain-com.xiaomi.mihome and select it
  • Click on the search icon in the header
  • Enter _mihome in the search field
  • Select the Documents/0123456789_mihome.sqlite file (the one with the number prefixed)
  • Click Export -> Selected… in the header and store the file

Now you’ve exported the SQLite database to your Mac and you can extract the tokens.


See also jghaanstra’s obtain token docs for alternative ways.


Extracting tokens

Now having extract either a backup or a database from the application, the miio-extract-tokens can be used to extract the tokens from it.

At the moment extracting tokens from a backup (Android), or from an extracted database (Android, Apple) are supported.

Encrypted tokens as recently introduced on iOS devices will be automatically decrypted. For decrypting Android backups the password has to be provided to the tool with --password <password>.

Please feel free to submit pull requests to simplify this procedure!

$ miio-extract-tokens backup.ab
Opened backup/backup.ab
Extracting to /tmp/tmpvbregact
Reading tokens from Android DB
        Model: lumi.gateway.v3
        IP address: 192.168.XXX.XXX
        Token: 91c52a27eff00b954XXX
        MAC: 28:6C:07:XX:XX:XX
        Model: yeelink.light.color1
        IP address: 192.168.XXX.XXX
        Token: 4679442a069f09883XXX
        MAC: F0:B4:29:XX:XX:XX
        Model: yeelink.light.color1
        IP address: 192.168.XXX.XXX
        Token: 7433ab14222af5792XXX
        MAC: 28:6C:07:XX:XX:XX
Flower Care
        Model: hhcc.plantmonitor.v1
        IP address: 134.XXX.XXX.XXX
        Token: 124f90d87b4b90673XXX
        MAC: C4:7C:8D:XX:XX:XX
Mi Robot Vacuum
        Model: rockrobo.vacuum.v1
        IP address: 192.168.XXX.XXX
        Token: 476e6b70343055483XXX
        MAC: 28:6C:07:XX:XX:XX

Extracting tokens manually

Run the following SQLite command:

sqlite3 <path of *_mihome.sqlite database> "select ZNAME,ZLOCALIP,ZTOKEN from ZDEVICE"

You should get a list which looks like this:

Device 1|x.x.x.x|0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef
Device 2|x.x.x.x|0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef
Device 3|x.x.x.x|0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef

These are your device names, IP addresses and tokens. However, the tokens are encrypted and you need to decrypt them. The command for decrypting the token manually is:

echo '0: <YOUR 32 CHARACTER TOKEN>' | xxd -r -p | openssl enc -d -aes-128-ecb -nopad -nosalt -K 00000000000000000000000000000000

Environment variables for command-line tools

To simplify the use, instead of passing the IP and the token as a parameter for the tool, you can simply set the following environment variables. The following works for mirobo, for other tools you should consult the documentation of corresponding tool.

export MIROBO_IP=
export MIROBO_TOKEN=476e6b70343055483230644c53707a12


If you want to read the device continue here.

source : https://python-miio.readthedocs.io/en/latest/discovery.html#environment-variables-for-command-line-tools